Detailed advantages | Five practical advantages of the new generation variable-frequency flowering machine

1. High production capacity and lower production costs

The single machine capacity of the new variable-frequency flowering machine is 300-1500 kg/h, which is twice the capacity of the old model. The automatic and uniform feeding prevents blockage and jamming, and the machine operates stably for 24 hours. The variable-frequency control reduces energy consumption and the power consumption per ton of raw materials is lower, significantly reducing the production costs of the processing plant.

2. Flexible loosening and low fiber loss

The gap of the needle roller and the tooth design are optimized, and the violent tearing process is abandoned. The fiber breakage rate is controlled within 3%, and the original fiber length is retained. The fibers after loosening have good appearance and higher selling price, improving the comprehensive utilization rate of raw materials.

3. Built-in dust removal, meeting environmental protection standards

A sealed negative pressure dust collection duct is equipped, and the dust generated during loosening is collected centrally. There is less dust in the workshop, meeting the environmental protection assessment requirements. No additional large-scale dust removal equipment needs to be installed, saving supporting investment.

4. Wide applicability of raw materials and strong versatility

It can process more than ten types of raw materials such as pure cotton scraps, polyester-cotton blends, polyester chemical fibers, old bedding, needle-punched cotton scraps, and yarn waste fallen cotton. By replacing a few accessories, it can switch processing categories and is suitable for multi-category waste material processing plants.

5. Low failure rate and convenient after-sales service

All key transmission components are processed and quenched, and bearings and gears use national standard parts. Standardized and universal procurement of wear parts is available; the manufacturer provides on-site installation and commissioning, worker practical operation training, and whole-machine warranty, making maintenance and maintenance convenient in the future.

The third article: Operating and maintenance guide | Safety operation procedures and daily